Dataphysics Limited

Gas distribution and vacuum for plasma sources

A gas distribution and vacuum system for hollow-cathode plasma sources, designed, built and calibrated in house.

← Back to the matrix

Experimental design & set-up · Plasma and surface processes

Your specialist lab layout: equipment in vacuum (HV/UHV), gas distribution systems, bulk and surface metrology and characterization.

An example: gas distribution for plasma sources

As an example I consider the layout of a gas distribution system built to feed between one and four hollow-cathode discharges. These plasmas can emit light at specific wavelengths, in this case thanks to the use of Xe: it is EUV light, used in lithography.

The system includes three different noble-gas sources (Ar, He, Xe) and capillaries carrying the desired proportions to the plasma cell. Figure 1 also shows a pictorial of the electric signals leading to an ADC and control board (pressure and temperature sensors, and controls for valves).

Layout of the gas distribution system for one plasma cell: gas cylinders, mixing boxes with capillaries, the cell, and the signal lines to the ADC and control board.
Figure 1. Gas distribution layout for one cell: gas sources, mixing, capillary lines, and the signal path to the ADC and control board.

Figure 2 shows other equipment from a related but separate set-up: the vacuum system and plasma cell for operation on Xe (Kr), with its pumping station (turbo and primary pumps), Pirani, Baratron and Penning gauges, and a photodiode for light detection. The vacuum reaches the high-vacuum range, down to about 10−6 mbar.

Diagram of the plasma cell with its grids and photodiode, the gas distribution box, flow-meter box, and the turbo and primary pumping station with pressure gauges.
Figure 2. Related equipment, from a separate set-up: plasma cell, pumping station, vacuum gauges and photodiode detection (high vacuum, down to about 10−6 mbar). It is not the system fed by the layout in Figure 1.

All constructed and calibrated in house — happy to discuss the details!

Planning an experiment or a lab set-up? info@dataphysics.ae